Ihe onyonyo OLV44 Na-anọpụ iche Silicone Sealant egosipụtara

OLV44 Igwe mkpuchi Silicone na-anọpụ iche

Nkọwa dị mkpirikpi:

OLV44bụ otu akụkụ, na-anọpụ iche na-agwọ ọrịa, obere modul silicone sealant nwere ezigbo mmachi na ogologo ndụ nchekwa maka akara okirikiri na ngwa glazing.

OLV44na-agwọta na ọnụ ụlọ okpomọkụ na ọnụnọ ikuku ikuku iji nye roba silicone na-agbanwe agbanwe na-adịgide adịgide.

Tinye:NO.1, AREA A, LONGFU INDUSTRY PARK, LONGFU DA DAO, LONGFU TOWN,SIHUI,GUANGDONG, CHINA

Tel:0086-20-38850236

Fax:0086-20-38850478

Zitere anyị email +8615800141656

Nkọwa ngwaahịa

Mkpado ngwaahịa

Njirimara

• ogologo ndụ nchekwa
• nrapado na-enweghị isi na ọtụtụ ihe
• anaghị emebi emebi na ọla
• adabara maka ihe ndị dị na alkaline dị ka ihe, ngwa agha, ciment fibrous
• fọrọ nke nta ka enweghị isi
• dakọtara na ihe mkpuchi mmiri na ihe mgbaze: enweghị ịkwaga plasticizer
• enweghị sag
• njikere gunnability na obere (+5 Celsius) na elu (+40 Celsius C) okpomọkụ
• ngwa ngwa crosslinking: ngwa ngwa na-aghọ-free
• mgbanwe na obere (-40 Celsius) na elu okpomọkụ (+150 Celsius)
• magburu onwe weatherability

Ubi nke ngwa

• akara nke njikọ njikọ na mgbasawanye maka ụlọ ọrụ ụlọ
• iko na windo ewu
• akara nke nkwonkwo n'etiti glazing na nkwado usoro (frames, transoms, mullions)

Asambodo

OLV44a kwadoro na nkewa dịka
ISO 11600 F/G, klas 25 LM
EN 15651-1, klaasị 25LM F-EXT-INT-CC
EN 15651-2, klas 25LM G-CC
DIN 18545-2, klas E
SNJF F/V, klas 25E
EMICODE EC1 PLUS

Adhesion

OLV44 na-egosipụta ezigbo nrapanye na-enweghị isi na ọtụtụ mkpụrụ, dịka iko, taịlị, ceramik, enamel, glazed
taịlị na clinker, ọla dịka aluminium, ígwè, zinc ma ọ bụ ọla kọpa, varnished, mkpuchi ma ọ bụ osisi a na-ese, na ọtụtụ plastik.
Ndị ọrụ ga-emerịrị ule nke ha n'ihi oke mkpụrụ dị iche iche.Enwere ike ime ka adhesion dịkwuo mma n'ọtụtụ ọnọdụ
site na pretreatment nke substrates na primer.Ọ bụrụ na nsogbu adhesion bilitere biko kpọtụrụ ọrụ aka anyị.

Mpempe akwụkwọ data teknụzụ (TDS)

OLV44 Neutral Low Modulus Silicone Sealant
Arụmọrụ		Ọkọlọtọ	Uru atụnyere	Usoro ule
Nwalee na 50± 5% RH na okpomọkụ 23± 2℃:
Njupụta (g/cm³)		±0.1	1.02 g/cm³	ISO 1183-1 A
Oge nhazi akpụkpọ ahụ		≤180	25 min	/
Ọnụ ọgụgụ extrusion - uka eruba		/	300 g/min	/
Ọdịnaya siri ike (%)		/	90.58	GB/T 13477
Slumpability (mm) kwụ ọtọ		≤3	0	GB/T 13477
Mbelata (mm) kehoraizin		adịghị agbanwe ọdịdị	adịghị agbanwe ọdịdị	GB/T 13477
Ọsọ ọgwụgwọ (mm/d)		/	3 mm/d	/
Dị ka Gwọrọ -Mgbe 21 ụbọchị na 50 ± 5% RH na okpomọkụ 23 ± 2 ℃:
Isi ike (Oké Osimiri A)		20-60	24	ISO 868
Ike ọdụdọ		/	0.7 N/mm²	ISO 8339-A
Ike akwa			4.5 N/mm	ISO 34, usoro C
Elongation na ezumike		/	> 300%	ISO 8339-A
Ike mmegharị (%)		/	50%	ISO 9047
Ike mmegharị (%)		/	25%	ISO 11600
Nchekwa	Ọnwa iri na abụọ